HomeTechnologySilver solder specifications

Silver solder specifications

This welding wire standard specifies silver solder metal. Not less than 20% silver content for brazing irons, copper, nickel and their alloys. DIN 8513 part 1 Requirements for metals. 

udo.co.th The equipment center, grinding machines, grinding wheels and various tools for welding work of all kinds. We have a team of highly experienced professionals to give advice and consultation to all customers.

Copper brazing DIN 8513 part 2 Requirements for silver brazing alloys containing less than 20% silver

  1. Solder symbol The material codes or numbers given in Table 1 apply to the solder symbol. The code L-Ag 40 Cd or material number 2.5141 has the following symbols.

Brazing Filler Metal DIN 8513-L-Ag 40 Cd or Brazing Filler Metal DIN 8513-2.5141

  1. Composition and physical properties

A silver brazing alloy containing not less than 20% silver containing silver-copper, zinc-cadmium, silver-copper-zinc, silver-copper-zinc alloys. and still have the original metal without zinc and cadmium as well

8.5 Requirements for brazing and brazing metals Aluminum and aluminum alloys DIN 8513 part 4 February 1981

This standard applies to aluminum and aluminum alloy solders. Hardening and brazing of aluminum and aluminum alloys.

for soldering

  1. Solder symbol

Table 1 shows the code or number of the solder material. For solder metal symbols, code L-A1 S1 12 or material number 3.2285, the symbols are as follows:

Brazing Alloy DIN 8513-L-AI SI 12 or Brazing Alloy DIN 8513-3.2285

  1. Composition and physical properties

8.6 Soft Solder Requirements According to JIS Z 3282-1986 (Soft Solder)

This Japanese industrial standard 089 Tin-Lead, Tin-Antimony, Tin-Silver, Tin-Bismuth, Lead-Silver, Tin-Lead-Silver light Tin-Lead-Bismuth is required for soft-soldering compounds. hereinafter referred to as “soft solder metal”

  1. Classification of solder metals

Types of solders are categorized according to their chemical composition as in Table 1.

  1. Quality

The quality of solder metal is as follows:

(1) Malleable solder shall be of consistent quality and free from defects that would adversely affect its use.

(2) The chemical composition is stated in Table 2 for Class 3 wire, Table 3 for Class A wire and Table 4 for Class B wire.

  1. Malleable solder symbol

Solder symbols include class, grade, form and size symbols. diameter (In case of bare welding wire and flat bar, the width size will be determined)

Soft solder There are several forms and are designated by abbreviation: rod (1), bare (B), flat strip (R), wire (W), custom form (F) and powder form (P).

8.7 Silver Brazing Filler Metals Specification Standard JIS Z 3261-1985 (Silver Brazing Filler Metals)

This Japanese industrial standard designates silver solder to be used for brazing.

hereinafter referred to as “hard solder” which

  1. Type of solder

There are 17 types of solder metals as shown in Table 1.

  1. Product Symbol

Details of products designated as symbols include the type of metal.

Hard solder, pattern and size Size of solder Based on the following format

– Free type (R) size, thickness x width

– Wire (W), size, diameter

– Wire rod (B) size: diameter x length

– Granules, powders and pastes (P) size is determined by the size of the metal powder grain size of the powder grain.

Defined as a “Mesh” unit, or possibly m, depending on the collusion.

8.8 Requirements for Copper and Copper-Zinc Brazing Filler Metals Standard JIS Z3262-1986 (Copper and Copper-Zinc Brazing Filler Metals)

This Japanese industrial standard The copper-copper-zinc solder is determined to be used for brazing, hereinafter referred to as “brazing brazing.

  1. Soldiers are divided into 11 types according to their chemical composition.
  2. Symbol of the product

The symbol of the product contains Which depends on the shape of the solder metal as follows

Types of solder, forms and sizes.

– Ribbon Band (R) Size – Thickness x Width

– wire (w) size – diameter growth

– wire rod (b) size – diameter x length grain, powder and paste (p) size is determined by the size of the metal powder grain.

The granule size is given in “Mesh” units or may be m depending on the agreement.

8.9 Requirements for Copper-Phosphorus Brazing Filler Metals JIS 2 3364-1985 (Copper Phosphorus Brazing Filler Metals) is a Japanese Industrial Standard. Designated copper phosphorus brazing alloy used for brazing In further detail, it will be called “Hard solder”

  1. Type of solder
  2. Symbol of the product

8.10 Specification for soldiers for aluminum and aluminum alloys JIS Z 3281-1988 (Solders for Aluminum and Aluminum Alloys) Standard

This Japanese industrial standard prescribes soft welding wire Used for soft soldering aluminum, aluminum alloys and dissimilar metals.

  1. Types and Symbols

Impurities in solder metal

The solder must not be contaminated by impurities. because it is detrimental to the ability to

Soldering The metal used to make the solder must be of purity as shown in Table 3. Therefore, care must be taken in melting and pouring. Do not cause fouling during production.

  1. Symbol of the product

The symbol contains Solder symbol, pattern, and diameter

Medium (in the case of round bars and flat bars) Forms are lump (1), rod (B), flat bar (R) and wire (W).

8.11 Specification for Aluminum Alloy Brazing Filler Metals JIS Z 3263-1992 Standard (Aluminum Alloy Brazing Filler Metals)

This Japanese industrial standard Assign aluminum brazing alloy Use aluminum brazing

for

  1. Types of aluminum brazzers
  2. Aluminum solder symbol

explore more

Explore More

Categories